DeWalt DC310 Manuál s instrukcemi stáhnout pdf (Strana 9)

• DO NOT splash or immerse in water or other liquids.

• Do not store or use the tool and battery pack in locations

where the temperature may reach or exceed 105°F (40 °)

(such as outside sheds or metal buildings in summer).

i_ WARNING: Never attempt to open the battery pack for any

reason, ff battery pack case is cracked or damaged, do not insert

into charger. Do not crush, drop or damage battery pack. Do not

use a battery pack or charger that has received a sharp blow, been

dropped, run over or damaged in any way (i.e., pierced with a nail,

hit with a hammer, stepped on). Damaged battery packs should be

returned to service center for recycling.

_ WARNING: Fire hazard. Do not store or carry battery so

that metal objects can contact exposed battery terminals.

For example, do not place battery in aprons, pockets, tool boxes,

product kit boxes, drawers, etc., with loose nails, screws, keys, etc.

Transporting batteries can possibly cause fires ff the battery

terminals inadvertently come in contact with conductive

materials such as keys, coins, hand tools and the like. The

US Department of Transportation Hazardous Material Regulations

(HMR) actually prohibit transporting batteries in commerce or

on airplanes (i.e., packed in suitcases and carry-on luggage)

UNLESS they are properly protected from short circuits. So

when transporting individual batteries, make sure that the battery

terminals are protected and well insulated from materials that could

contact them and cause a short circuit.

The RBRC TM Seal

The RBRC TM (Rechargeable Battery Recycling

Corporation) Seal on the lithium ion battery (or battery

pack) indicates that the costs to recycle the battery (or

battery pack) at the end of its useful life have already

been paid by DEWALT.

RBRC TM in cooperation with DEWALT and other battery users, has

established programs in the United States to facilitate the collection

of spent lithium ion batteries. Help protect our environment and

conserve natural resources by returning the spent lithium ion

battery to an authorized DEWALT service center or to your local

retailer for recycling. You may also contact your local recycling

center for information on where to drop off the spent battery.

RBRCTM is a registered trademark of the Rechargeable Battery Recycfing

Corporation.

Storage Recommendations

1. The best storage place is one that is cool and dry away from

direct sunlight and excess heat or cold.

2. Long storage will not harm the battery pack or charger. Under

proper conditions, they can be stored for 5 years or more.

Charger

Your battery pack requires a 1 hour DEWALT charger. Be sure

to read all safety instructions before using your charger. Consult

the chart on the back of this manual for compatibility of chargers

and battery packs.

Charging Procedure

1. Plug the charger into an appropriate outlet before inserting the

battery pack.

2. Insert the battery pack into the charger. The charger is equipped

with a three-light fuel gauge that will blink according to the state

of charge of the battery pack.

3. The completion of charge is indicated by the three red lights

remaining ON continuously. The pack is fully charged and may

be used at this time or left on the charger.

_¢ ¢ D 0% - 33% 1st light blinks

o-_¢ [3 33% - 66% 1st light on, 2nd light blinks

• o_l_ 66% - 99% 1st, 2nd lights on, 3 rd light blinks

• o • _ 100% 1st, 2 nd, 3 rd lights on

1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 61 62

Komentáře k této Příručce

Žádné komentáře

DeWalt DC310 Manuál s instrukcemi Strana 9

Komentáře k této Příručce

Související produkty a manuály pro Elektrické nářadí DeWalt DC310