DeWalt DW9108 Manuál s instrukcemi

Procházejte online nebo si stáhněte Manuál s instrukcemi pro Akumulátorové motorové pily DeWalt DW9108. DeWalt DW9108 Instruction manual Uživatelská příručka

  • Stažení
  • Přidat do mých příruček
  • Tisk
  • Strana
    / 16
  • Tabulka s obsahem
  • KNIHY
  • Hodnocené. / 5. Na základě hodnocení zákazníků
Zobrazit stránku 0
DC720-XE, DC730-XE, DC743-XE
CORDLESS COMPACT 1/2" (13 mm) DRILL/DRIVER
DC725-XE, DCD775-XE, DC727-XE, DC737-XE
CORDLESS COMPACT 1/2" (13 mm) DRILL/DRIVER/HAMMERDRILL
INSTRUCTION MANUAL
Zobrazit stránku 0
1 2 3 4 5 6 ... 15 16

Shrnutí obsahu

Strany 1 - INSTRUCTION MANUAL

DC720-XE, DC730-XE, DC743-XECORDLESS COMPACT 1/2" (13 mm) DRILL/DRIVER DC725-XE, DCD775-XE, DC727-XE, DC737-XE CORDLESS COMPACT 1/2" (13 mm)

Strany 2

8OPERATIONWARNING: To reduce the risk of serious personal injury, turn tool off and disconnect tool from power source before making any adjustments or

Strany 3 - SAVE THESE INSTRUCTIONS

9To remove the battery pack from the tool, press the release buttons (G) and firmly pull the battery pack out of the tool handle. Insert it into the c

Strany 4 - Electrical Safety

10WARNING: To reduce the risk of FIG. 4DRILLINGC personal injury, ALWAYS ensure workpiece is anchored or clamped firmly. If drilling thin mater

Strany 5 - Extension Cords

11Screwdriver Operation (Fig. 6) 1. Select the desired speed/torque range SCREWDRIVINGFIG. 6Cusing the dual range gear selector to match the speed a

Strany 6 - READ ALL INSTRUCTIONS

12• Damage caused where repairs have been made or attempted by others. • Damage due to misuse, neglect, wear and tear, alteration or modification.Th

Strany 8 - Indicator Light Operation

Battery Output Chargers/Charge Time Nominal 240 Volts 12 Volts X Indicates that the battery pack is not compatible with that specific char

Strany 10 - COMPONENTS (Fig. 1)

1IF YOU HAVE ANY QUESTIONS OR COMMENTS ABOUT THIS OR ANY DEWALT TOOL, CALL US AT: 1800 654 155 (Aust) or 0800 339258 (NZ). SAFETY INSTRUCTIONS FOR POW

Strany 11

2c) Prevent unintentional starting. Ensure the switch is in the off position before connecting to power source and/or battery pack, picking up or ca

Strany 12

3 • Replacement of the supply cord. If the supply cord is damaged, it must be replaced by the manufacturer or an authorised DEWALT Service Centre in

Strany 13 - SCREWDRIVING

4DANGER: Electrocution hazard. Never attempt to open the battery pack for any reason. If battery pack case is cracked or damaged, do not insert into c

Strany 14 - EWALT Reserves the right to

5SPECIFIC SAFETY INSTRUCTIONS FOR LITHIUM ION (LI-ION) • Do not incinerate the battery pack even if it is severely damaged or is completely worn out

Strany 15

6 • An extension cord must have adequate wire size (AWG or American Wire Gauge) for safety. The smaller the gauge number of the wire, the greater th

Strany 16 - DEWALT Industrial Tool Co.

7Charge Indicators Some chargers are designed to detect certain problems that can arise with battery packs. Problems are indicated by the red light fl

Komentáře k této Příručce

Žádné komentáře