DeWalt DW331-XE Manuál s instrukcemi

DW331-XEJIGSAWINSTRUCTION MANUAL

8 WARNING: After using the tool for an extended period on low speed settings, run it for approximately 3 minutes on maximum no-load speed.Sawing in W

9WARNING: Use a cooling lubricant (cutting oil) to prevent overheating of the saw blade or the workpiece.Optional AccessoriesConsult your dealer for f

Stanley Black & Decker82 Taryn Drive, Epping, VIC 3076 Australia • 1800 444 224 (Aust) or 0800 339 258 (NZ)www.dewalt.com.au • www.dewalt.co.nz(FE

1Definitions: Safety Guidelines The definitions below describe the level of severity for each signal word. Please read the manual and pay attention to

2 WARNING: To reduce the risk of injury, read the instruction manual.GENERAL POWER TOOL SAFETY WARNINGS WARNING! Read all safety warnings and all inst

3b) Do not use the power tool if the switch does not turn it on and off. Any power tool that cannot be controlled with the switch is dangerous and mu

4WARNING: Always wear proper personal hearing protection that conforms to AS/NZS1270 during use. Under some conditions and duration of use, noise from

5FIG. 1AJBCKIDEFHGINTENDED USEYour jigsaw DW331-XE has been designed for professional cutting of wood, steel, aluminium, plastic and ceramic material.

6Setting the Bevel Angle (Fig. 3)The adjustable shoe (I) allows cutting of LH and RH bevel angles up to 45˚. The bevel scale has preset positions at 0

7TO MOUNT THE INSERT INTO THE SHOE1. Slide the edges (N) into the grooves (O) of the shoe (I).2. Slide the insert back into position against the sho