DeWalt DCD795-XE Manuál s instrukcemi

Procházejte online nebo si stáhněte Manuál s instrukcemi pro Elektrické nářadí DeWalt DCD795-XE. DeWalt DCD795-XE Instruction manual Uživatelská příručka

  • Stažení
  • Přidat do mých příruček
  • Tisk
  • Strana
    / 16
  • Tabulka s obsahem
  • KNIHY
  • Hodnocené. / 5. Na základě hodnocení zákazníků
Zobrazit stránku 0
DCD790-XE
18V BRUSHLESS CORDLESS COMPACT 13 mm DRILL/DRIVER
DCD795-XE
18V BRUSHLESS CORDLESS COMPACT 13 mm DRILL/DRIVER/HAMMERDRILL
INSTRUCTION MANUAL
Zobrazit stránku 0
1 2 3 4 5 6 ... 15 16

Shrnutí obsahu

Strany 1 - INSTRUCTION MANUAL

DCD790-XE18V BRUSHLESS CORDLESS COMPACT 13 mm DRILL/DRIVERDCD795-XE18V BRUSHLESS CORDLESS COMPACT 13 mm DRILL/DRIVER/HAMMERDRILLINSTRUCTION MANUAL

Strany 2

8 IJKHABCFIG. 2DFGHEDCD795-XEbe kept away from charger cavities. Always unplug the charger from the power supply when there is no battery pack in the

Strany 3 - Technical Data

9INTENDED USEThese drills/drivers/hammerdrills are designed for professional drilling, percussion drilling and screwdriving applications.DO NOT use un

Strany 4

10FIG. 4 FIG. 5FFIG. 3 1. Turn tool off and disconnect tool from power source. 2. Grasp the black sleeve of the chuck with one hand and use the othe

Strany 5 - Electrical Safety

11It does not indicate tool functionality and is subject to variation based on product components, temperature and end-user application.For more infor

Strany 6 - Extension Cords

12 5. Always start with lower torque settings, then advance to higher torque settings to avoid damage to the workpiece or fastener.FIG. 9HAMMERDRILL

Strany 7 - READ ALL INSTRUCTIONS

13CHARGER CLEANING INSTRUCTIONSWARNING: Shock hazard. Disconnect the charger from the AC outlet before cleaning. Dirt and grease may be removed from t

Strany 8 - Charging Procedure (Fig. 1)

Stanley Black & Decker82 Taryn Drive, Epping, VIC 3076 Australia • 1800 338 002 (Aust) or 0800 339 258 (NZ)www.dewalt.com.au • www.dewalt.co.nz(

Strany 10 - FUTURE REFERENCE

1Definitions: Safety Guidelines The definitions below describe the level of severity for each signal word. Please read the manual and pay attention to

Strany 11

2accessories or poorly maintained, the vibration emission may differ. This may significantly increase the exposure level over the total working period

Strany 12 - OPERATION

3d) Remove any adjusting key or wrench before turning the power tool on. A wrench or a key left attached to a rotating part of the power tool may res

Strany 13 - Screwdriving (Fig. 10)

4WARNING: ALWAYS wear approved protective safety equipment complying with the following standards:• Eye protection: AS/NZS1337 Eye Protectors for Ind

Strany 14 - Cleaning

5or DC ...direct current or AC/DC ...alternating or ...Class I Construction direct current(grounded) no ...

Strany 15 - Accessories

6Important Safety Instructions for All Battery ChargersSAVE THESE INSTRUCTIONS: This manual contains important safety and operating instructions for b

Strany 16

7Indicator Light OperationPACK CHARGINGPACK CHARGEDxHOT/COLD DELAYPROBLEM PACK OR CHARGERPROBLEM POWERLINECharge Indicators This charger is designed t

Komentáře k této Příručce

Žádné komentáře